Rheal Gauthier wrote “You Make Me Whole” as part of the Resonate 2010 songwriter course. Here is the rough track. I decided to track the initial vocal and acoustics (played by Rheal) with a Drumcore Drum Loop.
You Make Me Whole – Rough Track
On a couple of successive evenings this week I put in an hour per night to lay down the bass and guitars. The lead guitar is my trusty Jeff Beck Les Paul. The left side rhythm guitar is recorded with a Telecaster. The right side chunking is the Les Paul with some added Soapbar PRS for brightness in the middle. All tones are either direct from the Swart Atomic Space Tone amp or, in the case the more distorted lead and rhythm sounds, aided by a Fulltone OCD overdrive pedal. In the end the track rocks pretty well.
You Make Me Whole
After listening to the tune a bit on my iPod I really got the sense that the last chorus needed a lift. I thought about maybe adding an organ part or electric guitar part but that seemed a bit overbearing for the track so I decided to try some acoustic guitar. My Bourgeois Slope D is great for strummed tracks. Pick selection is also very important especially with acoustic instruments. In this case I wanted an airy quality to the sound so I selected the old standby Fender Medium celluloid pick. I had thought originally about putting acoustic guitar as the basis of the entire track but that would not have filled in too many of the holes. So, here is the acoustic guitar track I recorded. I recorded two tracks and panned on hard left and one hard right. I used an Audio-Technica AT4041 condenser mic, about 2 feet away from the upper 14th fret point back at the body. Because the track was to be a background part I didn’t want a lot of bass of fullness in the sound and putting the mic a little farther away helps. Also, I eq’ed the track with a shelf tapering off starting at around 300 Hz. Here are the acoustic tracks by themselves…
Acoustic Guitar Tracks
…and here is how they sound in the track…
Welcome Home with Acoustic
So, that’s in for now on this track. I will come back to the track to do a final mix and mastering later on but now its time to start work on another of the tunes recorded that fateful Friday in July.
Time to add some guitars to the track. With vocals being the focus the tone of the guitar has to stay away from those midrange frequences. I selected my Telecaster through the Swart Atomic Space Tone. I took a quick picture of the rig before recording. The item on top of the amp is an attenuator that sounds pretty awesome and reduces the volume of the amp. Check out the Night Light from the Swart website. It’s a great alternative to having an amp with a master volume. Sweat tone. Here is a sample of the guitar sound I started with…
First Guitar Track
Here is the track with that first electric guitar in it…
Welcome Home – Rhythm Guitar Added
To balance this first guitar track a second stereo part recorded twice, one mixed far right and one mixed far left…
Welcome Home – With Additional Rhythm Guitar Tracks
Now for the intro, solo, and outro…
Welcome Home – With Intro, Solo, and Outro
The mix isn’t final and the vocals have to come up in places. Parts still need to be placed properly in the mix but something is missing in the choruses…but its late, that will have to wait until next post.
The vocal track is very brooding and breathy on this track and so I wanted to accentuate that in the mix. There are a few notes that are slightly out of tune so I tried to AutoTune just a few spots but it just using AutoTune can sometimes kill the spirit of a track. In this case I decided to just leave it alone and instead play on the vulnerability of the vocals. I selected the Vintage Channel plug-in and set it to some relatively radical settings and turned on the DeEsser feature to take some artifacts out of the vocals that I found not as pleasant after using the compressor. Take a listen.
Matt Horner – Welcome Home – Compression on Vocals
After this step its clear to me that the vocals will have to be very much front and centre in the track. This will effect how I play the guitar parts as you will hear in my next posting.
The keyboard track was recorded using the TruePiano plug-in so the recording made was that of the MIDI (musical instrument digital interface) messages being sent to the plug in. So, I am now able to edit the keyboard playing not just the audio. This allowed me to fix the timing. The picture here shows the track prior to fixing the timing of some of the playing. I was able to remove erroneous notes and sustain notes in the intro that were accidentally played staccato. So take a listen to the fixed version of the track with the revised keyboard and hear how it locks in with the bass and drums.
Matt Horner – Welcome Home – Fixed Keyboard Track
The first thing I did was to find some real drummer loops to put on this track before laying down the bass. I have been using Drumcore to avoid that programmed drum sound. I choose a series of loops recorded by Lonnie Wilson. You can see Lonnie recording grooves for Drumcore on YouTube. I then added the bass sound using my trusty MusicMan Stingray Bass direct into my Presonus Firebox interface. I will tweak the tone of the bass later.
Matt Horner – Welcome Home -Added Bass and Drums
Once the drum track was in the tune you can really hear the push pull of the tempo. Next step will be to modify the keyboard track to synch up more with the groove.
Mary MacLean has been holding a 3 week intensive course in worship and song writing called Resonate 2010. On Friday I recorded the rough tracks for 12 songs from the participants in this course. I’m going to blog the evolution of one of those tracks into a more complete song.
The first tune I’ve selected to do this with is Matt Horner’s Welcome Home. Since I only had 9 hours to record 12 songs we did not have a lot of time to be picky. Matt was not super confortable with playing the keyboard part. Dispite the fact that this was recorded at around 8 am I think it has some real potential. Here is the rough track.
Welcome Home – Rough Track
On Dec 17th the 3 bands I’ve been working played at the Unofficial, Unsanction, Holiday Party at the King’s Head to a full house of over 150 people. All the bands did a great job and people were on the dance floor all night. I multi-track recorded the proceedings and we video taped it. So guess what I did all Christmas Break? I mixed and merged audio with video. This last Friday the bands got together at my place for the “world premiere” of the recording (soon to be a fine commemorative DVD set). It was quite a challenge merging input from multiple tapes, dealing with the glitches in the video, and syncing everything up. In the end the bands were very satisifed with the end product and I’m pretty happy as well. However, I did have Don Voth make a modification to my amplifier after studying the results. I had an external switch added for the bright switch on the amp so I could run more treble from my overdrive pedals. I love the bright shimmering sound of the Metropolitan’s rhythm channel but when I put pedals in front of that for alternative lead sounds it was just too sizzling. Here is the final tune of the third band’s set, Kat and the Soul Dogs, with the fabulous Katherine Penfold on vocals, Gary Brenner on keys, Hal Ryckman on drums and vocals, Dave Christianson on drums and vocals, and Greg Boettcher on percussion.
On this track my signal chain is the guitar into a Durham Sexdrive Pedal, into the Tone King Metropolitan for the rhythm sound. For the lead sound I’m using a Diamond Boost-EQ pedal instead of the Sexdrive. I have a new GigRig switcher that allows me to control the amp and pedal in patches all at once…more on that in another post.
Last Saturday I decided to multi-track record one of the band practices for our HP (non-official) Seasonal (non-Christmas) Party (read, many disclaimers, etc, etc) on December 17th at the King’s Head. This band is one of three bands we have put together for the event. They are called “the Mountain Goats”. Reason for the name… our office has moved to Mountain Avenue, yes, there is a Mountain Avenue in Winnipeg, don’t ask why they would call it that given it seems to me to be one of the flattest streets in one of the flattest cities in Canada. Google searches have not revealed which city is actually the flattest though my guess is props will have to go to Regina. The “Goats” part of the name, well, not sure, if one of the band members can comment on why they call themselves “Goats” it may be helpful. There are no spring chickens in the band.
The line-up is:
Tim Grant – vocals
Mike Dyck – guitar (left)
Jean-Yves Pelletier – guitar (right)
Adam Halstrom – bass
Greg Boettcher – drums
Here’s a sample track…
I work for HP as the manager of the Microsoft Practice for Canada. This year is our second annual employee funded work party for HP in Winnipeg. Last year I put together 3 bands and worked for 6 weeks to whip them into shape. I played bass in two of the bands and guitar in the last band of the night. The party was a huge success and the bands did great. This year we got a bit more of a head start and a few more band members. I’m the musical director but the bands are a lot more independant. I only play in one of the bands and I’m leaving the bass playing to someone else in the other bands. The bands are sounding great. We have been recording the practices first with a Zoom H2 and now with a laptop loaded with Cakewalk Sonar. This week we introduced a new song to the band I play guitar in, Kat and the Soul Dogs. This is a bit rough as its just a direct recording of the practice but I love the spirit of it. This really captures the party atmosphere these guys are creating.